According to the U.S. Department of Energy, "insulating steam distribution lines can typically reduce energy losses by 90% and help ensure proper steam pressure at plant equipment.” While this statistic can easily convince you that insulating your steam lines must be a priority, it doesn't offer any advice on the best way to insulate your steam pipes. We’re the experts on insulating steam components and will address this question below.
Traditionally, stay-in-place fiberglass insulation is used to insulate steam pipes, particularly for residential purposes but also for commercial use. The fiberglass insulation comes in varying thicknesses from ½” to 2”+ depending on the size of the pipe and its operating temperature.
Often, the plugs are not replaced after the conclusion of the inspection. The integrity of the insulation is now compromised as heat escapes through the opening on the surface. Additionally, moisture can enter through the opening and get trapped in the insulation. This increases the risk for CUI (corrosion under insulation) to occur and cause process leakage.
Thermaxx Jackets’ steam pipe insulation jackets are easily installed, removed, and replaced requiring no special skills. They come in a wide range of nominal pipe sizes (NPS) from 2” to 24”.
Presently most industry designs aim at a touch temperature (outer surface) of the insulation at 140°F or less. Thermaxx Jackets are designed to have a touch temperature of 120°F or less for two reasons. First, energy loss is reduced for maximum savings. Second, 140°F is still hot to touch, while 120°F is much more “skin” friendly.
Custom jackets are also available for larger pipes, sharp angles and bends, or other non-standard piping. Thermaxx Jackets ensure that moisture does not plague pipe surfaces and are very cost-effective. Their dependability is backed by a 5-year warranty. We, as the experts on steam component insulation, feel confident that effective and efficient Thermaxx Jackets are the best way to insulate steam pipes.
