We often hear from clients facing a similar problem: condensation (or sweat) forming on their cold pipe or component. One may think it’s something that can be overlooked, but water can cause serious damage to sensitive piping or equipment if left untreated. Corrosion (the gradual destruction of materials, usually metals, by chemical and/or electrochemical reaction with their environment) can occur on the sweating pipe, and the equipment around it, leading to messy leaks and equipment failure. Moisture buildup can also cause mold or mildew to form, or create a slippery workspace. In this article, we will discuss the problem in depth and present our solution.
Pipes do not literally sweat, although it appears that way. The condensation that forms on the outside of a cold pipe or component is actually moisture from the air, not the pipe. Like a cold bottle of soda on a hot day, when humid air comes in contact with a chilled pipe or component the air loses its capacity to hold water vapor, as a result excess water forms into liquid water droplets on or near the cold surface. The condensation process affects piping and components year-round, as furnaces heat the air during the winter months.
Yes, it is normal for pipes to sweat sometimes. Sweating — or condensation — occurs when the cold water inside the pipes meets the warm and humid air inside the building. Since the cold water attracts moisture from the warm air, it condenses on the pipes.
Although some condensation is normal, prolonged excess moisture can lead to the breakdown of your pipes' integrity, which could cause mold growth and corrosion.
First, you should consider your pipes' location. Most pipes that sweat or form condensation are the ones most exposed to the moist, warm air of your buildings. If your pipes have condensation and are located outside or in a cool area, they might have a leak instead.
You can explore a few different tactics to determine if your pipes are leaking or sweating. First, try changing the humidity level of the area your pipes are located. One way to do that is by increasing ventilation, which you can measure with a hygrometer. If you can reduce the humidity, the condensation and sweating should stop. If there is still water pooling or dripping from your pipes, they are probably leaking.
Leaking pipes will also have rust or corrosion near the fittings. You can test for a leak using your water meter, which requires you to shut off the water in the system.
Components that drip condensation onto the floor cause a serious safety hazard to employees because a fall hazard or slip hazard is created. We all know that an employee getting hurt on the job is the last thing an employer wants to see. Abating this severe safety hazard is of utmost importance. Equipment that sweats and condensates poses a serious corrosion risk to the integrity and safety of your equipment and facility as well. The risks begin when moisture comes into contact with your equipment, particularly if it’s made of metal, iron, or steel. The thickness of your metals can be reduced by corrosion, which could lead to structural failure. Even minor cracks in piping and equipment can pose a contamination risk to processes occurring beneath the piping, and to the fluids inside.
Equipment that sweats and condensates poses a serious corrosion risk to the integrity and safety of your equipment and facility as well. The risks begin when moisture comes into contact with your equipment, particularly if it’s made of metal, iron, or steel. The thickness of your metals can be reduced by corrosion, which could lead to structural failure. Even minor cracks in piping and equipment can pose a contamination risk to processes occurring beneath the piping and to the fluids inside.
Finally, a building owner’s life-cycle costs can be senselessly increased when not taking the necessary steps to prevent such damage. In a worst-case scenario, rusted piping without condensation prevention can lead to a full system failure. This could cause harm to the building or its occupants.
The most effective way to protect your piping and equipment from condensation damage is to properly insulate it. According to insulation.org, “Incorrect product selection or using untrained installers can cause a building owner’s life-cycle costs to increase by millions of dollars compared to the minor cost premium of correctly insulating the pipe.”
Traditional stay-in-place insulation, such as spray foam insulation, may seem like the best economical choice but it has quite a few downfalls. When repairs need to be made to valves, backflow preventers, water meters, piping or equipment the insulation is removed often without being replaced. This can leave large gaps in your insulation coverage and allow condensation to affect the remaining insulation.
When spray foam insulation consistently gets wet from a sweating pipe, it loses its insulation value and shape. The spray foam insulation will need to be replaced much earlier than expected, and the component it was meant to protect could need to be replaced as well. This is why installing the proper insulation the first time can save building managers millions of dollars in life-cycle costs.
You are likely to find condensation on your cool water supply pipes. Other common areas include plumbing drains and fixtures and water pressure and storage tanks.
Many areas within municipal, university, school, and hospital or health care facilities see an increased risk for sweating pipes. Some of the most common places for condensation to form include:
Wherever you have sweating pipes, it's crucial to find a solution so you can get the most out of your systems and avoid other dangerous hazards.
The best way to stop condensation from forming on pipes is to prevent the warm, humid air from coming into contact with the chilled pipe’s outer surface. Removable reusable insulation blankets, like Thermaxx Cold Insulation Jackets, are designed to fit snugly and keep the ambient air temperature and humidity from affecting your pipe.
Insulative materials trap air within their fibers to prevent it from reaching the other side. An insulated cold water pipe's surface will be safe from the warm air around it. The warm air never comes into contact with the pipe's cold surface, meaning the air holds onto its water molecules.
Installing reusable pipe insulation can be an excellent decision for your company. The key is to choose the right type of insulation for your needs. Cold water pipe insulation should possess specific characteristics that allow it to mitigate moisture, transcend temperatures, and stand the test of time. Here are some features to look for in cold water pipe insulation:
Thermaxx produces job-specific cold water pipe insulation that prevents and resists moisture. We offer numerous products that simplify the process of insulating cold water pipes in basements, outdoor areas, and any other unconditioned spaces.
Reusable insulation blankets, like Thermaxx Cold Insulation Jackets, are designed to fit snugly and keep the ambient air temperature and humidity from affecting your pipe.
If traditional pipe insulation gets wet from pipe sweating or water spillage, it can trap the water and cause CUI (Corrosion Under Insulation). This is a problem that often goes undetected, as it is hidden beneath the insulation. It is discovered only during inspections, or when a leak occurs due to corrosion.
Thermaxx Cold Jackets are built with hydrophobic aerogel insulation and drainage vents that allow moisture to escape at temperatures ranging from -328 up to 257 degrees Fahrenheit. You can also select materials such as flexible closed cell sheet insulation for temperatures dropping below freezing.
Thermaxx Cold Insulation Jackets are also easily removed, allowing for faster and more regular inspections of your pipes and equipment.
Condensation is a common source of water pipe damage, but freezing is another pressing issue. The fluid running through your pipes may freeze when exposed to low temperatures. Freezing can also occur when condensation accumulates just before a significant temperature decrease. Frozen pipes inhibit water flow and may expand to the point of bursting. Each scenario will cost you time and money, but reusable insulation can prevent pipes from freezing in the first place, eliminating the need for repairs.
Our antifreeze outdoor pipe insulation jackets feature materials like aerogel or closed cell insulation to ensure internal temperature consistency when the air around the pipe gets colder. We'll customize insulation that fits your outdoor pipes so you avoid backups and corrosion while extending the lifespan of equipment like water meters and release valves.
Yes, hot water pipes will sweat sometimes. Again, the condensation is caused by the difference in water temperature versus air temperature and humidity. If the hot water pipes are exposed to cold air, they might sweat.
Sweating hot water pipes are usually much less common than cold ones. If it occurs, it will often be in the pipes closest to the building's perimeters.
Ready to see how combating corrosion and freezing with moisture-resistant pipe insulation can save your organization money? Learn more about Thermaxx Cold Jackets or Contact Us today to discuss custom pipe insulation options for your facility!
