Best Insulating Fabric Materials for Removable Blanket Insulation
Key Features of Removeable Insulation Blankets
Bettina Equities Insulates Boiler Rooms with Thermaxx Jackets
This case study was written by Jack McTigue, an insulation expert at Thermaxx Jackets
Wye Strainers vs Basket Strainers
What is a strainer? Simply put a strainer is a component that has a perforated or wire mesh cylinder within the body of the component that causes impurities in the fluid stream to be captured and ultimately flushed out of the system. The fluid enters the body of the strainer, flows into and through the mesh cylinder. The mesh cylinder “strains” out particles such as rust, dirt and other foreign...
5 Most Common Thermal Insulation Materials
Most Common Thermal & Heat Insulation Materials Fiberglass Insulation Mineral Wool Cellulose Polyurethane Foam Polystyrene Other Common Insulation Materials Best Thermal Insulation Material for Steam Pipes Mineral Wool vs. Fiberglass Fiberglass vs. Cellulose Traditional vs. Advanced Pipe Insulation What to Consider When Choosing Your Pipe Insulation Learn More with Thermaxx Jackets There are...
Why Traditional Hard Insulation Is Costing You Money
A Connecticut university used to have a serious energy loss problem. One example of this was a valve in the mechanical room. Although hard insulation was dug out to form the shape of the valve, it still left the valve bonnet exposed, leading to significant heat loss. The temperature of the valve bonnet was 224 degrees. After installing aremovable insulation cover, the surface temperature was...
What is Thermodynamic Steam Trap Insulation?
Should You Insulate Your Steam Traps? That’s a question we get asked regularly, and there seems to be some confusion about whether or not you can or should do this. The answer is simple — yes.
Brooklyn Museum Gets an Insulation Upgrade
This case study was written by Jennifer Kaelin, an expert at Thermaxx Jackets
How Do You Install Blanket Insulation for Components?
What is Removable Blanket Insulation? A Thermaxx insulation blanket is a custom-made removable insulation pad designed for thermal insulation use on mechanical engineering components. These components include all of the following elements: Steam Condensate Hot water Cold water / chilled water system Removable insulation is critical to any component that requires routine maintenance as the...
Removable Insulation Blankets For Exhaust Systems
Thermaxx Jackets has decades of experience designing, hand-sewing, and installing custom insulation blankets for industrial OEM exhaust applications across the US. From insulating exhaust manifolds in marine engine rooms & vehicles to power generators, the benefits of Thermaxx Jackets removable insulation blankets on exhaust systems are plenty!
Insulation Case Study: Crosby Building | 516 O’Farrell Street, San Francisco CA
This case study was written by Rose Titcomb of Thermaxx Jackets
